|
08/06/2013 - Time to get some of
the finishing kit down from the loft
 | Drill
the elevator horn attach point |
| Drill
the elevator to push rod connection point |
| Fit
vertical stabiliser and final drill/ream holes, and horn stops |
| Fit all fibre glass |
| Fit the exterior trim |
Its
quite fiddly to get this down straight and a good fit, but e got
there in the end.
I have
decided not to bother with the rubber channel for the pieces
underneath the horizontal stabilizer. Looks a good enough
fit without them
|
![[08062013] - Fuselage](_derived/[06082013]%20-%20Fuselage.htm_cmp_travel01_flash_v2010_bnr.gif){kind=small}
